Aluminum fueled Hydrogen Generator

[ You can opt out of Google Ads if you are a registered user at /ad-options ]
$699.00
SKU: AL_H_gen
UC_Image: 

Pure Hydrogen can be made from Aluminum and Lye by the following equation

Sodium aluminate is produced and pure Hydrogen Gas

2 Al + 2 NaOH + 2 H2O → 2 NaAlO2 + 3 H2

See https://en.wikipedia.org/wiki/Sodium_aluminate

The reaction has two issues, it is highly exothermic, meaning due the reaction itself it gets hot enough to boil the water of the equation and produce both steam in conjunction with the hydrogen meaning to separate the steam one has to bubble the product though cool water to re-condense the steam in the Hydrogen gas back into aqueous form, and the other issue is fresh feed stock of water must be added to keep producing Hydrogen.   

This is a "nasty" way to make hydrogen becasue you will be dealing with a caustic solution all the time that can burn the skin and corrode most painted surfaces 

You must depressurize and feed aluminum to the generator periodically and clean out the the precipitate Sodium_aluminate periodically and unless the reaction is 100 balanced, the precipitate will be caustic - that is it will chemically burn bare skin and damage painted surfaces etc.

To stop or slow the reaction one must let the water deplete if it gets too hot, and that means something must monitor the heat.  Purity of the Hydrogen gas is measured by a digital gauge and allowed to fill a tank up to 100 psi.

This is not a hydrogen making process for the poor attention to detail type person.

This will make a 8 inch round by 1 foot tall enclosure Rated with a maximum burst pressure of 160 PSI and an operating pressure of 20 psi. 

You will need to drill and cut as required for your design or tap and/or glue fittings in for your lines as you desire.

0 You can opt out of Google Ads if you are a registered user at /ad-options ]

This is a custom part upon ordering is not refundable nor will be returnable.

Has a suggested design diagram on how to build a good pressure gas housing and why along with a list of materials.

  Four  hours of consulting is available included via email in the purchase price via our message system through this site only.  This item is sold outright and may be used as you see fit. We will not however, assist with unlawful or dangerous implementations of this product.

This is a custom part upon ordering is not refundable nor will be returnable.

This a la carte option does not include, tank, plumbing, gas generator design instructions, pump, hoses, or sensors - housing materials only - you need to have us design a full system for that above to be included.

Stainless Steel pressure Dome kit - Housing parts only

Stainless temperature probe => see https://bigbay4bestbuys.com/thermocouple

Selectable pressure  and purity gauge - dual digital gauge => see https://bigbay4bestbuys.com/content/hydrogen-purity-gauge-and-controller

Float switch => see https://bigbay4bestbuys.com/stainless_vertical_switch

SOLD BY BITCOIN PAYMENT ONLY

If you need info on how to buy with Bitcoin see => https://bigbay4bestbuys.com/bitcoin_climb

 

English
Price: $699.00
Weight: 10 lb
Dimensions: 11 in × 11 in × 5.5 in
[ You can opt out of Google Ads if you are a registered user at /ad-options ]